We are the source manufacturer, support OEM/ODM, wholesale service.The following specifications are for reference.
| Model | anker-48-100 |
| Nominal Voltage | 51.2/48V |
| Nominal capacity | 100Ah |
| Dimensions (L*W*H) | 448*483*178mm |
| Weight | 53KG |
| Charging method | CC/CP |
| Charging current | 0.2C standard/0.5C maximum continuous charging |
| Charge cut-off voltage | 54.6V |
| Discharge method | CC/CP |
| Discharge current | 0.5C standard / 1C maximum continuous discharge |
| Discharge cut-off voltage | 42V |
| Display | LCD |
| Communication interface | 485/232/CAN |
| Working temperature | charging: 0-55℃, discharging: -20-60℃ |
| Storage temperature | 0-45℃ (best environment) |
| Storage humidity | 5%-95% |
| Shipping status | Voltage: 50-52V SOC: 60%-80% |
| Maximum number of parallel connections | 15 |
Solar Storage
Switching applications and more
Base transceiver station
Communication equipments
Central office
Telecommunication systems
Electronic cash registers
Microprocessor based office machine
UPS
High cycle life
6000 cycles @80% DoD for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Do NOT short circuit, reverse polarity, crush or disassemble.
Do NOT heat or incinerate.
Do NOT immerse in any liquid.
Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
